Soci reaction training table

Soci reaction tr--ning table,Electric vehicle --r -conditioning tr--ning device

1. Experimental purpose and principle of electric flocculation reaction experimental device:

This experiment is to insert multiple sets of electrodes of positive and negative in the wastewater. When it is passed by DC, the electrolytic, particle polarization, electrophoresis, oxidation reduction, between electrolytic products and the interaction between wastewater.

When using a soluble electrode (generally st--nless steel) as anode electrolyte, the anode metal will dissolve the cationic cation of aluminum or iron, and combine it with the hydroxyl (OH-) in the water to form aluminum, iron hydroxide with strong adsorption performance , To adsorb the impurities particles in the water, forming floccope. This kind of floccope and the micro -foam (hydrogen) produced on the cathode are separated by --r.

Second, technical indicators and parameters of the electrical flocculation reaction experimental device:

1. Environmental temperature: 5 ℃ ～ 40 ℃

2. Treatment of water: 10 ～ 20L/h

3. Design in and out of water quality range:

Inlet water BOD5 600 ～ 1200mg/L Out of water 50 ～ 100 mg/L

COD 1000 ～ 2000mg/L out of water 100 ～ 200 mg/L

Enter the water 100 ~ 300mg/L out of water 20-50 mg/L

Inlet water pH 6-9 out of water 6-9

4. Electric flocculation reaction pool: Ø350 mm × 600mm

5. Total size of the device: length × width × height = 800mm × 400mm × 1700mm

6. Power 220V single -phase three -line power 600W

Soci reaction tr--ning table,Electric vehicle --r -conditioning tr--ning device

1. Product introduction

Select pure electric vehicle --r conditioning and warm --r system to truly display the structure and control principles of the core components of pure electric vehicle --r conditioners and the core components of the thermal --r system, installation location and operating conditions, and cultivate students' analysis of the f--lure analysis of pure electric vehicle --r conditioners and thermal system f--lure. And processing ability. Suitable for the demolition and m--ntenance of pure electric vehicle --r conditioners and thermal system theory and m--ntenance tr--ning, structure and principle cognition, system operation, functional dynamic demonstration, fault detection and diagnostic teaching needs of all kinds of theory and m--ntenance tr--ning.

2. Functional characteristics

1. Each m--n component is installed on the platform to ret--n the original vehicle electrical connection method and real car function. After power off, it can be convenient for disassembly. Tr--ning students can master the m--n points of disassembly inspection of --r conditioning and warm --r system components in the process of disassembling the connection process.

2. Air conditioning and warm wind tr--ning T--wan Power Source: 48V.

3. Operate the --r -conditioning control panel switch to truly demonstrate the working process and working principle of the --r -conditioning system.

4. High and low pressure meters are installed on the panel. The inlet and outlet thermometer can be displayed in real time. The parameters of the --r -conditioning pipeline pressure and the temperature of the --r inlet --r inlet can be displayed in real time.

5. The equipment provides students with practical work platforms such as refrigerant and leakage.

6. The panel uses a 4mm thick aluminum plastic panel, and the vertical installation panel UV tablet inkjet is printed with colorful complete standard system map boards. Students can intuitively control the map boards and real objects, understand and analyze the working principle of the system.

7. Electrical signals that detect terminals on the panel and can directly detect system circuit components on the panel, such as resistors, voltage, current, frequency signals, etc.

8. Install the fault simulation system to achieve the fault setting and diagnosis and exclusion of the low -voltage circuit system. The setting and assessment fault points of common faults can be set up.