Artificial Wetland Experimental Device

Artificial Wetland Experimental Device,Agricultural machine charging power tr--ning device

1. M--n technical indicators and parameters:

1. Environmental temperature: 5 ℃ ～ 40 ℃

2. Device shape size: 2400mm × 500mm × 1300mm

3. Work power: AC220V ± 10%, 50Hz, single -phase three -line system, power of 600W, safety protection: ground protection, leakage protection, overcurrent protection

3. M--n configuration:

1. One set of vertical flow artificial wetland reaction pools, white PP board material and thickness of 10mm, empty valve installed on the bottom plate,

2. One set of horizontal submarine artificial wetland reaction pools, white PP board material and thickness of 10mm, empty valve installed on the bottom plate,

3. 1 buffer tank, (250L), 1 out of water storage tank, (100L)

4, 204 st--nless steel pumps, flowing 1m3/h, r--sing 15m, speed 2900R/min, power 0.37kW.

5. Anti -corrosion improvement of 1 magnetic pump, traffic: 16 ～ 19 (L/min), r--sing: 2.7 ～ 3.4 (m) power 20W;

6. 1 of water inlet flow, (100-1000L/h)

7. 1 set of liquid level display,

8. 1 batch of vermiculite fillers, 1 quotes of quartz sand filler, 1 batch of ceramic fillers,

9. 1 batch of sampling ports, (UPVC valve Zhongc-- brand)

10. Power control system: 1 double -sided sub -light -dense -densely pattern plastic control box, leakage protector (Delixi brand), voltage meter, lock button switch, wire tube, etc.

11. Support UPVC connection pipe and valve.

Artificial Wetland Experimental Device,Agricultural machine charging power tr--ning device

1. Product introduction

The device is based on the physical object of the 750P tractor charging system to fully display the composition and working process of the charging system.

It is suitable for the school's teaching needs for charging system theory and m--ntenance tr--ning.

2. Functional characteristics

1. Real and running charging system, fully display the composition of the charging system.

2. Open the ignition switch to trigger the operation of the three -phase motor, drive the working process of the generator, the charging indicator, the voltage of the battery end rising, and the work process of truly demonstrating the vehicle charging system. The value of the charging current and the battery voltage can be observed through the current meter and voltage meter on the panel.

3. The teaching board panel adopts a ** aluminum -plastic plate with strike, pollution resistance, fire prevention, and moisture -proof, and spray -p--nted on the surface by special crafts; the panel prints with color circuit diagrams that never fade; students can intuitively control circuit diagrams and physical objects Understanding and analyzing the working principle of the automotive charging system.

4. The teaching board panel is installed with a total component component of the generator, which can intuitively understand the composition of the generator.

5. The detection terminal is installed on the teaching panel. It can directly detect the electrical signals of the circuit components of the car charging system directly on the panel, such as resistance, voltage, current, frequency signal, etc.

6. Demonstration panel parts use 1.5mm cold plate stamping and forming structure, beautiful appearance; the ch--n part is welded with steel structure, the surface is treated with spraying process, a self -locking wheel device, and the base of the teaching board is equipped with a desktop of about 40cm. , Easy to place data, light detection instruments, etc.

7. Machinery assembly and fitter assembly virtual simulation software: This software is developed based on Unity3D. It can select 6 -level image quality. It has the design and virtual disassembly of the reducer and shaft structure, the design and simulation of common mechanical institutions, institutional resource libraries, institutional resource libraries. Typical mechanical institutions (virtual disassembly of gasoline engines), software is an overall software, which cannot be separate resources.