DY-501 gas dust collector experimental device

The cyclone dust collector uses the flow velocity of dust-laden gas to make the *rflow continuously rotate in a cert*n direction in the dust removal device. The particles obt*n centrifugal force in the rotation of the *rflow, causing the particles to separate from the *rflow. The cyclone dust collector has the advantages of simple structure, low cost, and convenient equipment m*ntenance and rep*r. It can also be used to purify high-temperature dust-laden flue gas and recover valuable dust. This experimental system is m*nly used to demonstrate the principle of the cyclone dust removal process.

2. M*n technical parameters and indicators:

1. Air volume: 300~700m3/h;

2. Dust concentration of inlet gas: <50g/m3

3. Dust removal efficiency: 70%~80%;

4. Pressure drop: <2000Pa;

5. Device dimensions: length 1800mm width 450mm height 1600mm,

6. Working power supply: AC220V±10%, 50Hz, single-phase three-wire system, power 1500W; Safety protection: with grounding protection, leakage protection, overcurrent protection;
7. Installation of power lines and control lines: Environmentally friendly flame- retardant electrical wiring ducts must be used, which are standardized and organized in accordance with national standards, have insulation characteristics, neat wiring, reliable installation, and are easy to find, rep*r and replace lines;

3. M*n configuration:

1. One set of cyclone dust collector, made of transparent organic glass, with a wall thickness of 8mm, including dust removal device;

2. 1 set of automatic feeding device for plexiglass dust: vertical feeding;
3. 1 set of gas-dust static mixer: box-type static mixer is adopted;
4. 1 U-shaped pressure gauge, 2 sets of manual monitoring inlet and outlet, 2 sets of pressure measuring rings, 1 batch of transparent pressure measuring hoses;
5. 1 centrifugal fan: power supply voltage: 220V, power 1.1Kw, speed 2900r/min;
6. 1 set of frequency converter: control the fan torque to adjust the *r volume;
7. Power control system: 1 double-sided matte dense pattern spray-p*nted electric control box, leakage protector (Delixi brand), self-locking button switch with light,
8. Ø 110 connecting pipeline and control ball valve
9. St*nless steel frame test bench (38mm×38mm st*nless steel square tube, casters are all universal wheels with locking feet), etc.

Similar products: